Netcut is a program that can be used to eliminate unauthorized users from a network. Depending on the router, the process of booting someone off a network may vary greatly. ..

Method-1 Using the Page of Your Router

Your computer, your phone, your TV, and all other devices should be disconnected from the Internet. This means no online services, no downloads, and no streaming.

If you find any remaining addresses on your computer or on an intruder’s computer, it is likely that they are connected to the network and have been invaders. Remove any Ethernet cords from any devices that are directly connected to the router through Ethernet cables (s).

Find the IP address of your router. 

Your router’s IP address is typically printed on a label on the back or bottom of the device. Find your router’s address here: To remove someone from your network, you will need to know your router’s IP address. This can be found by following these steps: ..

Windows: Click Start, select Settings, then Network & Internet, click Status, then scroll down and click Examine the numerical address to the right of the “Default gateway” heading in your network properties by viewing them, scrolling down to the header, and selecting it.

To connect to a Wi-Fi network, open System Preferences, click Network, and select the Wi-Fi network. Then, press Advanced and select the TCP/IP tab. Next, check the numerical address to the side of the “Router” title. ..

Visit the page for your router.

Your router’s numeric address will appear in a new window on your computer. Type the address into the address bar and hit Enter.

If required, log in.

When prompted, provide the access username and password for your router. The router’s manual, online documentation, or the backside of the router should have these credentials if you didn’t set them yourself.

When you try to change the settings on your router, you might be asked to log in later.

Locate the menu for Wi-Fi connections.

This section lists all active Wi-Fi connections alphabetically.

Some routers have parental controls that can help you keep your children safe online. ..

Take a look at the connections that are in place. 

If you see a connection that isn’t associated with one of your devices, you should be able to block it.

Choose the connection you want to stop.

Some routers let you choose the connection you want to use. Others might require you to do something else, like checking a box next to it.

Select “Block” or “Remove” from the menu.

Choosing a connection that is close to the one you’re seeking to cut will help you start it. ..

If required, save your modifications.

If you want to keep your changes, select the Save option. If you don’t want to keep your changes, click the Dashboard link (or a similar option) or the name of the router’s manufacturer at the top of the page. ..

Change the password for your network.

If you have forgotten your router’s password, you can reset it by following these steps:

  1. Resetting the router will erase all of its settings, so be sure to back them up first.
  2. On the router’s main page, under Settings, click the Restore Default Settings link.
  3. Enter your current password in the Password field and click Save Changes.
  4. If you have a wireless network, make sure that it is turned off before proceeding.
  5. Disconnect all of your devices from the router and wait five minutes for it to restart automatically.
  6. Reconnect all of your devices and try to connect to the network again- if you are successful, then your router has been reset and you can proceed with step 7 below. If not, please contact customer service for further assistance. If you forget your router’s password or need to change it because someone else is using it, follow these steps: 1) Resetting the router will erase all of its settings so be sure to back them up first; 2) On the router’s main page under Settings click Restore Default Settings; 3) Enter your current password in Password field and click Save Changes; 4) If you have a wireless network make sure that it is turned off before proceeding; 5) Disconnect all of your devices from Router and wait 5 minutes for Router to restart automatically; 6) Reconnect all of your devices try connecting to Router again- if successful then Router has been reset and user can proceed with step 7 below if not please contact customer service for further assistance ..

After updating your router’s password, you’ll need to re-establish connectivity with the router using any Internet-connected devices. ..

Method-2  How to use NetCut on Windows

If you have any remaining addresses that belong to the computer or an intruder, using this method will make it easy to determine if there are invaders on your network. ..

After completing the NetCut configuration, you must restart your computer before continuing.

Remove an item from your network if it has “apple” next to the “Manufacturer” section even though you wouldn’t own any Apple products.

If you notice an unusual IP address, it may be your router. ..

To add a user to the block list:

  1. Reboot your computer.
  2. Open Control Panel.
  3. Under System and Security, click User Accounts and Family Safety.
  4. Under User Accounts, click Add or Remove Users.
  5. In the Enter the user name box, type the user name you want to add to the block list, and then click OK. ..